Home / Blog / How to Choose Heavy Duty Casters: Load, Wheel Material and Floor

How to Choose Heavy Duty Casters: Load, Wheel Material and Floor

1. Start with the real load per wheel

The most common sizing mistake is dividing the total load by the number of casters. Real life is not that kind: floors are uneven, ramps concentrate weight, and a trolley that carries 1,200 kg evenly can still put most of that weight on two wheels while turning.

The safe rule: divide the total load by 3, not by 4 — even on a four-wheel trolley. That covers shock loading, uneven floors and the wheel that always seems to hit the dock plate first.

  • Add the tare weight of the trolley or rack itself — it counts too.
  • If the equipment gets towed, pushed fast, or crosses ramps, add 25–30% on top.
  • Never plan to run a caster at its maximum rated load continuously; 70–80% is a healthy working point.

2. Match the tread to the floor, not to the price

The wheel material decides how long the caster lives and how your floor looks after six months of daily use. The three workhorses in heavy duty service are PU on iron core, nylon and cast iron.

  • PU on cast iron core: the default for warehouses — carries full load, quiet, non-marking, kind to epoxy floors.
  • Nylon (PA6): higher load in the same size, oil and chemical resistant, but louder and harder on floors.
  • Cast iron: maximum load and heat tolerance, lowest cost per kilo carried — but it will chew up soft floors and is loud on concrete.
  • TPR: quietest option, for lighter loads and hospital or lab environments rather than heavy industry.

3. Do not ignore the bracket

A great wheel on a thin bracket is still a warranty claim. For genuine heavy duty service, check the bracket before the wheel: pressed steel thickness, a double ball raceway, and a welded (not riveted) fork on models above 300 kg.

  • Ask for the bracket steel thickness — 5–6 mm is heavy duty territory.
  • Double ball raceway keeps the swivel turning smoothly under side loads.
  • Kingpinless (forged raceway) versions are worth it for towing and 24/7 duty cycles.

4. Mounting and bearings: the details buyers forget

Top plate size is not standardized across suppliers — an imported caster with a different bolt pattern will not drop into your existing equipment. Send us the plate drawing or the old caster itself, and we will match it. For bearings, roller bearings handle heavy slow loads; ball bearings roll easier for pushing by hand; sealed versions keep out dust and washdown water.

5. A 60-second checklist before you order

Send us these five answers and you will get an accurate quotation with the right model — usually within 24 hours:

  • Total load (including the trolley itself) and number of casters.
  • Floor type: epoxy, concrete, tile, steel plate, outdoor.
  • Environment: wet, oily, hot (above 60 °C?), washdown.
  • Manual pushing or towing? Speed and distance per shift.
  • Mounting: top plate size or stem, swivel / rigid / brake.

Need casters for your application?

Send the load, floor and quantity — we reply with the model, price and lead time within 24 hours.

Get a quotation